Ordering no:
Female panel mount connector, solder, front fastened
Female panel mount connector, solder, front fastened, Series 770
Available numbers of contacts
Variants for number of contacts 8
09 0774 190 08
Bayonet NCC female panel mount connector, Contacts: 8, Shielding is not possible, dip-solder, IP67 when unplugged as well
Bayonet, series 770, Miniature connectors
| Order number |
09 0774 190 08
|
| Connector locking system | Bayonet |
| Termination | dip-solder |
| Degree of protection | IP67 when unplugged as well |
| Mechanical operation | > 5000 Mating cycles |
| Upper limit temperature | 85 °C |
| Lower limit temperature | -25 °C |
| Rated current (40 °C) | 2 A |
| Rated voltage | 175 V |
| Rated impulse voltage | 1750 V |
| Pollution degree | 2 |
| Overvoltage category | II |
| Insulating material group | II |
| Volume resistivity | ≤ 15 mΩ |
| Contact material | CuSn (bronze) |
| Contact plating | Au (gold) |
| Contact body material | PA |
| Housing material | PA |
| Customs tariff number | 85369010 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
Downloads
Data sheet
Contact to customer service
Do you have any questions regarding our products or do you wish an individual offer?