Ordering no:
Male panel mount connector, crimp
Male panel mount connector, crimp, Series 423/ 723/ 425
Available numbers of contacts
09 0111 700 04
M16 IP67 male panel mount connector, Contacts: 4, Shielding is not possible, crimp (Crimp contacts must be ordered separately), IP67, UL
M16, series 723, Miniature connectors
Order number |
09 0111 700 04
|
Connector locking system | bolted |
Termination | crimp (Crimp contacts must be ordered separately) |
Wire gauge (mm) | see crimp contacts under accessories |
Degree of protection | IP67 |
Mechanical operation | > 500 Mating cycles |
Upper limit temperature | 100 °C |
Lower limit temperature | -40 °C |
Rated current (40 °C) | 5 A |
Rated voltage | 250 V |
Rated impulse voltage | 1500 V |
Pollution degree | 1 |
Overvoltage category | I |
Insulating material group | III |
Volume resistivity | ≤ 5 mΩ |
Insulation resistance | ≥ 10¹⁰Ω |
Contact material | depending on crimp contact (accessory) |
Contact body material | PBT (UL 94 V-0) |
Housing material | Zinc die-cast nickel-plated |
Approval 1 | UL |
Customs tariff number | 85369010 |
Weight (g) | 10 |




Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
- The connector is not suitable for mains voltages. Please observe the pollution degrees and the overvoltage category. For further information refer to ‘Technical support’ in the Download Centre.
Downloads
Data sheet
Certificates
CAD files
09 0115 700 05
M16 IP67 male panel mount connector, Contacts: 5, Shielding is not possible, crimp (Crimp contacts must be ordered separately), IP67, UL
M16, series 723, Miniature connectors
Order number |
09 0115 700 05
|
Connector locking system | bolted |
Termination | crimp (Crimp contacts must be ordered separately) |
Wire gauge (mm) | see crimp contacts under accessories |
Degree of protection | IP67 |
Mechanical operation | > 500 Mating cycles |
Upper limit temperature | 100 °C |
Lower limit temperature | -40 °C |
Rated current (40 °C) | 5 A |
Rated voltage | 250 V |
Rated impulse voltage | 1500 V |
Pollution degree | 1 |
Overvoltage category | I |
Insulating material group | III |
Volume resistivity | ≤ 5 mΩ |
Insulation resistance | ≥ 10¹⁰Ω |
Contact material | depending on crimp contact (accessory) |
Contact body material | PBT (UL 94 V-0) |
Housing material | Zinc die-cast nickel-plated |
Approval 1 | UL |
Customs tariff number | 85369010 |
Weight (g) | 10.237 |




Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
- The connector is not suitable for mains voltages. Please observe the pollution degrees and the overvoltage category. For further information refer to ‘Technical support’ in the Download Centre.
Downloads
Data sheet
Certificates
CAD files
09 0123 700 06
M16 IP67 male panel mount connector, Contacts: 6 DIN, Shielding is not possible, crimp (Crimp contacts must be ordered separately), IP67, UL
M16, series 723, Miniature connectors
Order number |
09 0123 700 06
|
Connector locking system | bolted |
Termination | crimp (Crimp contacts must be ordered separately) |
Wire gauge (mm) | see crimp contacts under accessories |
Degree of protection | IP67 |
Mechanical operation | > 500 Mating cycles |
Upper limit temperature | 100 °C |
Lower limit temperature | -40 °C |
Rated current (40 °C) | 5 A |
Rated voltage | 250 V |
Rated impulse voltage | 1500 V |
Pollution degree | 1 |
Overvoltage category | I |
Insulating material group | III |
Volume resistivity | ≤ 5 mΩ |
Insulation resistance | ≥ 10¹⁰Ω |
Contact material | depending on crimp contact (accessory) |
Contact body material | PBT (UL 94 V-0) |
Housing material | Zinc die-cast nickel-plated |
Approval 1 | UL |
Customs tariff number | 85369010 |
Weight (g) | 10.5 |




Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
- The connector is not suitable for mains voltages. Please observe the pollution degrees and the overvoltage category. For further information refer to ‘Technical support’ in the Download Centre.
Downloads
Data sheet
Certificates
CAD files
09 0127 700 07
M16 IP67 male panel mount connector, Contacts: 7, Shielding is not possible, crimp (Crimp contacts must be ordered separately), IP67, UL
M16, series 723, Miniature connectors
Order number |
09 0127 700 07
|
Connector locking system | bolted |
Termination | crimp (Crimp contacts must be ordered separately) |
Wire gauge (mm) | see crimp contacts under accessories |
Degree of protection | IP67 |
Mechanical operation | > 500 Mating cycles |
Upper limit temperature | 100 °C |
Lower limit temperature | -40 °C |
Rated current (40 °C) | 5 A |
Rated voltage | 125 V |
Rated impulse voltage | 800 V |
Pollution degree | 1 |
Overvoltage category | I |
Insulating material group | III |
Volume resistivity | ≤ 5 mΩ |
Insulation resistance | ≥ 10¹⁰Ω |
Contact material | depending on crimp contact (accessory) |
Contact body material | PBT (UL 94 V-0) |
Housing material | Zinc die-cast nickel-plated |
Approval 1 | UL |
Customs tariff number | 85369010 |
Weight (g) | 10.207 |




Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
Downloads
Data sheet
Certificates
CAD files
09 0173 700 08
M16 IP67 male panel mount connector, Contacts: 8 DIN, Shielding is not possible, crimp (Crimp contacts must be ordered separately), IP67, UL
M16, series 723, Miniature connectors
Order number |
09 0173 700 08
|
Connector locking system | bolted |
Termination | crimp (Crimp contacts must be ordered separately) |
Wire gauge (mm) | see crimp contacts under accessories |
Degree of protection | IP67 |
Mechanical operation | > 500 Mating cycles |
Upper limit temperature | 100 °C |
Lower limit temperature | -40 °C |
Rated current (40 °C) | 5 A |
Rated voltage | 60 V |
Rated impulse voltage | 500 V |
Pollution degree | 1 |
Overvoltage category | I |
Insulating material group | III |
Volume resistivity | ≤ 5 mΩ |
Insulation resistance | ≥ 10¹⁰Ω |
Contact material | depending on crimp contact (accessory) |
Contact body material | PBT (UL 94 V-0) |
Housing material | Zinc die-cast nickel-plated |
Approval 1 | UL |
Customs tariff number | 85369010 |
Weight (g) | 10 |




Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
Downloads
Data sheet
Certificates
CAD files
Contact to customer service
Do you have any questions regarding our products or do you wish an individual offer?