Ordering no:
Male panel mount connector, central lock, PG 13.5
Male panel mount connector, central lock, PG 13.5, Series 623
Available numbers of contacts
99 4637 20 06
M23 male panel mount connector, Contacts: 6, Shielding is not possible, solder, IP67
M23, series 623, Power connectors
| Order number |
99 4637 20 06
|
| Connector locking system | bolted |
| Termination | solder |
| Arrangement of contacts | clockwise |
| Wire gauge (mm) | 2,50 mm² |
| Wire gauge (AWG) | 14 |
| Degree of protection | IP67 |
| Mechanical operation | > 50 Mating cycles |
| Upper limit temperature | 125 °C |
| Lower limit temperature | -20 °C |
| Rated current (40 °C) | 20 A |
| Rated voltage | 300 V |
| Rated impulse voltage | 2500 V |
| Pollution degree | 3 |
| Overvoltage category | II |
| Insulating material group | III |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Contact material | CuZn (brass) |
| Contact plating | Au (gold) |
| Contact body material | PBT/PA66 |
| Housing material | Zinc die-cast nickel-plated |
| Customs tariff number | 85369010 |
| Weight (g) | 33.5 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
Downloads
Data sheet
99 4603 21 09
M23 male panel mount connector, Contacts: 9, Shielding is not possible, solder, IP67
M23, series 623, Power connectors
| Order number |
99 4603 21 09
|
| Connector locking system | bolted |
| Termination | solder |
| Arrangement of contacts | left-handed |
| Wire gauge (mm) | 8x1,5/ 1x2,5 mm² |
| Wire gauge (AWG) | 8x16/1x14 |
| Degree of protection | IP67 |
| Mechanical operation | > 50 Mating cycles |
| Upper limit temperature | 125 °C |
| Lower limit temperature | -20 °C |
| Rated current (40 °C) | 8 x 8 A / 1 x 20 A |
| Rated voltage | 300 V |
| Rated impulse voltage | 2500 V |
| Pollution degree | 3 |
| Overvoltage category | II |
| Insulating material group | III |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Contact material | CuZn (brass) |
| Contact plating | Au (gold) |
| Contact body material | PBT/PA66 |
| Housing material | Zinc die-cast nickel-plated |
| Customs tariff number | 85369010 |
| Weight (g) | 32 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
Downloads
Data sheet
99 4603 20 09
M23 male panel mount connector, Contacts: 9, Shielding is not possible, solder, IP67
M23, series 623, Power connectors
| Order number |
99 4603 20 09
|
| Connector locking system | bolted |
| Termination | solder |
| Arrangement of contacts | clockwise |
| Wire gauge (mm) | 8x1,5/ 1x2,5 mm² |
| Wire gauge (AWG) | 8x16/1x14 |
| Degree of protection | IP67 |
| Mechanical operation | > 50 Mating cycles |
| Upper limit temperature | 125 °C |
| Lower limit temperature | -20 °C |
| Rated current (40 °C) | 8 x 8 A / 1 x 20 A |
| Rated voltage | 300 V |
| Rated impulse voltage | 2500 V |
| Pollution degree | 3 |
| Overvoltage category | II |
| Insulating material group | III |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Contact material | CuZn (brass) |
| Contact plating | Au (gold) |
| Contact body material | PBT/PA66 |
| Housing material | Zinc die-cast nickel-plated |
| Customs tariff number | 85369010 |
| Weight (g) | 32.11 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
Downloads
Data sheet
99 4607 21 12
M23 male panel mount connector, Contacts: 12, Shielding is not possible, solder, IP67
M23, series 623, Power connectors
| Order number |
99 4607 21 12
|
| Connector locking system | bolted |
| Termination | solder |
| Arrangement of contacts | left-handed |
| Wire gauge (mm) | 1,00 mm² |
| Wire gauge (AWG) | 18 |
| Degree of protection | IP67 |
| Mechanical operation | > 50 Mating cycles |
| Upper limit temperature | 125 °C |
| Lower limit temperature | -20 °C |
| Rated current (40 °C) | 8 A |
| Rated voltage | 150 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 3 |
| Overvoltage category | II |
| Insulating material group | III |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Contact material | CuZn (brass) |
| Contact plating | Au (gold) |
| Contact body material | PBT/PA66 |
| Housing material | Zinc die-cast nickel-plated |
| Customs tariff number | 85369010 |
| Weight (g) | 32.5 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
99 4607 20 12
M23 male panel mount connector, Contacts: 12, Shielding is not possible, solder, IP67
M23, series 623, Power connectors
| Order number |
99 4607 20 12
|
| Connector locking system | bolted |
| Termination | solder |
| Arrangement of contacts | clockwise |
| Wire gauge (mm) | 1,00 mm² |
| Wire gauge (AWG) | 18 |
| Degree of protection | IP67 |
| Mechanical operation | > 50 Mating cycles |
| Upper limit temperature | 125 °C |
| Lower limit temperature | -20 °C |
| Rated current (40 °C) | 8 A |
| Rated voltage | 150 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 3 |
| Overvoltage category | II |
| Insulating material group | III |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Contact material | CuZn (brass) |
| Contact plating | Au (gold) |
| Contact body material | PBT/PA66 |
| Housing material | Zinc die-cast nickel-plated |
| Customs tariff number | 85369010 |
| Weight (g) | 32.625 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
99 4611 20 16
M23 male panel mount connector, Contacts: 16, Shielding is not possible, solder, IP67
M23, series 623, Power connectors
| Order number |
99 4611 20 16
|
| Connector locking system | bolted |
| Termination | solder |
| Arrangement of contacts | clockwise |
| Wire gauge (mm) | 1,00 mm² |
| Wire gauge (AWG) | 18 |
| Degree of protection | IP67 |
| Mechanical operation | > 50 Mating cycles |
| Upper limit temperature | 125 °C |
| Lower limit temperature | -20 °C |
| Rated current (40 °C) | 8 A |
| Rated voltage | 150 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 3 |
| Overvoltage category | II |
| Insulating material group | III |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Contact material | CuZn (brass) |
| Contact plating | Au (gold) |
| Contact body material | PBT/PA66 |
| Housing material | Zinc die-cast nickel-plated |
| Customs tariff number | 85369010 |
| Weight (g) | 34 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
99 4633 20 19
M23 male panel mount connector, Contacts: 19, Shielding is not possible, solder, IP67
M23, series 623, Power connectors
| Order number |
99 4633 20 19
|
| Connector locking system | bolted |
| Termination | solder |
| Arrangement of contacts | clockwise |
| Wire gauge (mm) | 16x1,0/ 3x1,5 mm² |
| Wire gauge (AWG) | 16x18/ 3x16 |
| Degree of protection | IP67 |
| Mechanical operation | > 50 Mating cycles |
| Upper limit temperature | 125 °C |
| Lower limit temperature | -20 °C |
| Rated current (40 °C) | 16 x 8 A / 3 x 10 A |
| Rated voltage | 150 V |
| Rated impulse voltage | 1500 V |
| Pollution degree | 3 |
| Overvoltage category | II |
| Insulating material group | III |
| Volume resistivity | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Contact material | CuZn (brass) |
| Contact plating | Au (gold) |
| Contact body material | PBT/PA66 |
| Housing material | Zinc die-cast nickel-plated |
| Customs tariff number | 85369010 |
| Weight (g) | 33.801 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
Contact to customer service
Do you have any questions regarding our products or do you wish an individual offer?