Ordering no:
Female angled connector injection-moulded cable
Female angled connector injection-moulded cable, Series 692/693
Available numbers of contacts
79 0234 20 04
RD24 female angled connector, Contacts: 3+PE, Shielding is not possible, moulded on cable, IP67, PVC black, 4 x 1,5 mm²
RD24, series 692, Power connectors
| Order number |
79 0234 20 04
|
| Connector locking system | bolted |
| Termination | moulded on cable |
| Wire gauge (mm) | 1.50 mm² |
| Wire gauge (AWG) | 16 |
| Cable length | 2 m |
| Degree of protection | IP67 |
| Mechanical operation | > 500 Mating cycles |
| Upper limit temperature | 80 °C |
| Lower limit temperature | -25 °C |
| Rated current (40 °C) | 16 A |
| Rated voltage | 400 V |
| Rated impulse voltage | 6000 V |
| Pollution degree | 3 |
| Overvoltage category | III |
| Insulating material group | III |
| Volume resistivity | ≤ 5 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Contact material | CuZn (brass) |
| Contact plating | Ag (silver) |
| Contact body material | PA 12 |
| Cable data | |
| Sheath material | PVC |
| Single-lead insulation | PVC sw 1, sw 2, sw 3, grün/gelb |
| Single-lead structure | 28x0,25 mm |
| Conductor resistance | - |
| Bending radius, fixed cable | 120 mm |
| Bending radius, moving cable | 60 mm |
| Customs tariff number | 85444290 |
| Weight (g) | 280.5 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
79 0238 20 07
RD24 female angled connector, Contacts: 6+PE, Shielding is not possible, moulded on cable, IP67, PVC black, 7 x 0,75 mm²
RD24, series 692, Power connectors
| Order number |
79 0238 20 07
|
| Connector locking system | bolted |
| Termination | moulded on cable |
| Wire gauge (mm) | 0.75 mm² |
| Wire gauge (AWG) | 18 |
| Cable length | 2 m |
| Degree of protection | IP67 |
| Mechanical operation | > 500 Mating cycles |
| Upper limit temperature | 80 °C |
| Lower limit temperature | -25 °C |
| Rated current (40 °C) | 8 A |
| Rated voltage | 250 V |
| Rated impulse voltage | 4000 V |
| Pollution degree | 3 |
| Overvoltage category | III |
| Insulating material group | III |
| Volume resistivity | ≤ 5 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Contact material | CuZn (brass) |
| Contact plating | Ag (silver) |
| Contact body material | PA 12 |
| Cable data | |
| Sheath material | PVC |
| Single-lead insulation | PVC sw 1, sw 2, sw 3, grün/gelb |
| Single-lead structure | 28x0,25 mm |
| Conductor resistance | - |
| Bending radius, fixed cable | 120 mm |
| Bending radius, moving cable | 60 mm |
| Customs tariff number | 85444290 |
| Weight (g) | 312 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
Contact to customer service
Do you have any questions regarding our products or do you wish an individual offer?