Ordering no:
Female angled connector, cable outlet 3.5-5 mm
Female angled connector, cable outlet 3.5-5 mm, Serien 712
Available numbers of contacts
99 0402 70 02
M9 IP67 female angled connector, Contacts: 2, 3,5 - 5,0 mm, Shielding is not possible, solder, IP67
M9, series 712, Subminiature connectors
Beställningsnummer |
99 0402 70 02
|
Steckverbinder Verriegelung | bolted |
Anschlussart | solder |
Anschlußquerschnitt (mm) | 0,25 mm² |
Anschlußquerschnitt (AWG) | 24 |
Kabeldurchlass | 3,5 - 5,0 mm |
Schutzart | IP67 |
Mechanische Lebensdauer | > 500 Mating cycles |
Obere Grenztemperatur | 85 °C |
Untere Grenztemperatur | -40 °C |
Bemessungsstrom (40°C) | 4 A |
Bemessungsspannung | 125 V |
Bemessungs-Stoßspannung | 1500 V |
Verschmutzungsgrad | 1 |
Überspannungskategorie | II |
Isolierstoffgruppe | III |
Durchgangswiderstand | ≤ 3 mΩ |
Insulation resistance | ≥ 10¹⁰Ω |
Material Kontakt | CuSn (bronze) |
Kontaktoberfläche | Au (gold) |
Material Kontaktkörper | PA (UL 94 V-0) |
Customs tariff number | 85369010 |
Weight (g) | 10.322 |




Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
99 0406 70 03
M9 IP67 female angled connector, Contacts: 3, 3,5 - 5,0 mm, Shielding is not possible, solder, IP67
M9, series 712, Subminiature connectors
Beställningsnummer |
99 0406 70 03
|
Steckverbinder Verriegelung | bolted |
Anschlussart | solder |
Anschlußquerschnitt (mm) | 0,25 mm² |
Anschlußquerschnitt (AWG) | 24 |
Kabeldurchlass | 3,5 - 5,0 mm |
Schutzart | IP67 |
Mechanische Lebensdauer | > 500 Mating cycles |
Obere Grenztemperatur | 85 °C |
Untere Grenztemperatur | -40 °C |
Bemessungsstrom (40°C) | 4 A |
Bemessungsspannung | 125 V |
Bemessungs-Stoßspannung | 1500 V |
Verschmutzungsgrad | 1 |
Überspannungskategorie | II |
Isolierstoffgruppe | III |
Durchgangswiderstand | ≤ 3 mΩ |
Insulation resistance | ≥ 10¹⁰Ω |
Material Kontakt | CuSn (bronze) |
Kontaktoberfläche | Au (gold) |
Material Kontaktkörper | PA (UL 94 V-0) |
Customs tariff number | 85369010 |
Weight (g) | 10.412 |




Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
99 0410 70 04
M9 IP67 female angled connector, Contacts: 4, 3,5 - 5,0 mm, Shielding is not possible, solder, IP67
M9, series 712, Subminiature connectors
Beställningsnummer |
99 0410 70 04
|
Steckverbinder Verriegelung | bolted |
Anschlussart | solder |
Anschlußquerschnitt (mm) | 0,25 mm² |
Anschlußquerschnitt (AWG) | 24 |
Kabeldurchlass | 3,5 - 5,0 mm |
Schutzart | IP67 |
Mechanische Lebensdauer | > 500 Mating cycles |
Obere Grenztemperatur | 85 °C |
Untere Grenztemperatur | -40 °C |
Bemessungsstrom (40°C) | 3 A |
Bemessungsspannung | 125 V |
Bemessungs-Stoßspannung | 1500 V |
Verschmutzungsgrad | 1 |
Überspannungskategorie | II |
Isolierstoffgruppe | III |
Durchgangswiderstand | ≤ 3 mΩ |
Insulation resistance | ≥ 10¹⁰Ω |
Material Kontakt | CuSn (bronze) |
Kontaktoberfläche | Au (gold) |
Material Kontaktkörper | PA (UL 94 V-0) |
Customs tariff number | 85369010 |
Weight (g) | 10.517 |




Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
99 0414 70 05
M9 IP67 female angled connector, Contacts: 5, 3,5 - 5,0 mm, Shielding is not possible, solder, IP67
M9, series 712, Subminiature connectors
Beställningsnummer |
99 0414 70 05
|
Steckverbinder Verriegelung | bolted |
Anschlussart | solder |
Anschlußquerschnitt (mm) | 0,25 mm² |
Anschlußquerschnitt (AWG) | 24 |
Kabeldurchlass | 3,5 - 5,0 mm |
Schutzart | IP67 |
Mechanische Lebensdauer | > 500 Mating cycles |
Obere Grenztemperatur | 85 °C |
Untere Grenztemperatur | -40 °C |
Bemessungsstrom (40°C) | 3 A |
Bemessungsspannung | 125 V |
Bemessungs-Stoßspannung | 1500 V |
Verschmutzungsgrad | 1 |
Überspannungskategorie | II |
Isolierstoffgruppe | III |
Durchgangswiderstand | ≤ 3 mΩ |
Insulation resistance | ≥ 10¹⁰Ω |
Material Kontakt | CuSn (bronze) |
Kontaktoberfläche | Au (gold) |
Material Kontaktkörper | PA (UL 94 V-0) |
Customs tariff number | 85369010 |
Weight (g) | 10.595 |




Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
99 0422 70 07
M9 IP67 female angled connector, Contacts: 7, 3,5 - 5,0 mm, Shielding is not possible, solder, IP67
M9, series 712, Subminiature connectors
Beställningsnummer |
99 0422 70 07
|
Steckverbinder Verriegelung | bolted |
Anschlussart | solder |
Anschlußquerschnitt (mm) | 0,14 mm² |
Anschlußquerschnitt (AWG) | 26 |
Kabeldurchlass | 3,5 - 5,0 mm |
Schutzart | IP67 |
Mechanische Lebensdauer | > 500 Mating cycles |
Obere Grenztemperatur | 85 °C |
Untere Grenztemperatur | -40 °C |
Bemessungsstrom (40°C) | 1 A |
Bemessungsspannung | 125 V |
Bemessungs-Stoßspannung | 1500 V |
Verschmutzungsgrad | 1 |
Überspannungskategorie | II |
Isolierstoffgruppe | III |
Durchgangswiderstand | ≤ 3 mΩ |
Insulation resistance | ≥ 10¹⁰Ω |
Material Kontakt | CuSn (bronze) |
Kontaktoberfläche | Au (gold) |
Material Kontaktkörper | PA (UL 94 V-0) |
Customs tariff number | 85369010 |
Weight (g) | 10.459 |




Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
99 0426 70 08
M9 IP67 female angled connector, Contacts: 8, 3,5 - 5,0 mm, Shielding is not possible, solder, IP67
M9, series 712, Subminiature connectors
Beställningsnummer |
99 0426 70 08
|
Steckverbinder Verriegelung | bolted |
Anschlussart | solder |
Anschlußquerschnitt (mm) | 0,14 mm² |
Anschlußquerschnitt (AWG) | 26 |
Kabeldurchlass | 3,5 - 5,0 mm |
Schutzart | IP67 |
Mechanische Lebensdauer | > 500 Mating cycles |
Obere Grenztemperatur | 85 °C |
Untere Grenztemperatur | -40 °C |
Bemessungsstrom (40°C) | 1 A |
Bemessungsspannung | 125 V |
Bemessungs-Stoßspannung | 1500 V |
Verschmutzungsgrad | 1 |
Überspannungskategorie | II |
Isolierstoffgruppe | III |
Durchgangswiderstand | ≤ 3 mΩ |
Insulation resistance | ≥ 10¹⁰Ω |
Material Kontakt | CuSn (bronze) |
Kontaktoberfläche | Au (gold) |
Material Kontaktkörper | PA (UL 94 V-0) |
Customs tariff number | 85369010 |
Weight (g) | 10.511 |




Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
Contact to customer service
Do you have any questions regarding our products or do you wish an individual offer?