Ordering no:
Female angled connector, cable outlet 4-6 mm, plastic model
Female angled connector, cable outlet 4-6 mm, plastic model, Serier 682
Available numbers of contacts
09 0134 70 02
M16 IP40 female angled connector, Contacts: 2, 4,0 - 6,0 mm, Shielding is not possible, solder, IP40
M16, series 682, Miniature connectors
| Beställningsnummer |
09 0134 70 02
|
| Kontaktdonslåsning | bolted |
| Anslutning | solder |
| Tvärsnitt (mm) | 0.75 mm² |
| Tvärsnitt (AWG) | 18 |
| Kabeluttag | 4,0 - 6,0 mm |
| Kapslingsklass | IP40 |
| Mekanisk livslängd | > 500 Mating cycles |
| Övre gränstemperatur | 85 °C |
| Lägre gränstemperatur | -40 °C |
| Märkström (40°C) | 7 A |
| Märkspänning | 250 V |
| Märksstötsspänning | 1500 V |
| Föroreningsgrad | 1 |
| Överspänningskategori | I |
| Isolermaterialgrupp | III |
| Resistans | ≤ 5 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Kontaktmaterial | CuSn (bronze) |
| Kontaktplätering | Ag (silver) |
| Kontaktkroppsmaterial | PBT (UL 94 V-0) |
| Kontakthusmaterial | PA |
| Customs tariff number | 85369010 |
| Weight (g) | 16.462 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- The connector is not suitable for mains voltages. Please observe the pollution degrees and the overvoltage category. For further information refer to ‘Technical support’ in the Download Centre.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
Nedladdningar
Produktblad
09 0136 70 03
M16 IP40 female angled connector, Contacts: 3 DIN, 4,0 - 6,0 mm, Shielding is not possible, solder, IP40
M16, series 682, Miniature connectors
| Beställningsnummer |
09 0136 70 03
|
| Kontaktdonslåsning | bolted |
| Anslutning | solder |
| Tvärsnitt (mm) | 0.75 mm² |
| Tvärsnitt (AWG) | 18 |
| Kabeluttag | 4,0 - 6,0 mm |
| Kapslingsklass | IP40 |
| Mekanisk livslängd | > 500 Mating cycles |
| Övre gränstemperatur | 85 °C |
| Lägre gränstemperatur | -40 °C |
| Märkström (40°C) | 7 A |
| Märkspänning | 250 V |
| Märksstötsspänning | 1500 V |
| Föroreningsgrad | 1 |
| Överspänningskategori | I |
| Isolermaterialgrupp | III |
| Resistans | ≤ 5 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Kontaktmaterial | CuSn (bronze) |
| Kontaktplätering | Ag (silver) |
| Kontaktkroppsmaterial | PBT (UL 94 V-0) |
| Kontakthusmaterial | PA |
| Customs tariff number | 85369010 |
| Weight (g) | 16.586 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- The connector is not suitable for mains voltages. Please observe the pollution degrees and the overvoltage category. For further information refer to ‘Technical support’ in the Download Centre.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
Nedladdningar
Produktblad
CAD-filer
09 0136 79 03
M16 IP40 female angled connector, Contacts: 3 DIN, 4,0 - 6,0 mm, Shielding is not possible, solder, IP40
M16, series 682, Miniature connectors
| Beställningsnummer |
09 0136 79 03
|
| Kontaktdonslåsning | bolted |
| Anslutning | solder |
| Tvärsnitt (mm) | 0.75 mm² |
| Tvärsnitt (AWG) | 18 |
| Kabeluttag | 4,0 - 6,0 mm |
| Kapslingsklass | IP40 |
| Mekanisk livslängd | > 500 Mating cycles |
| Övre gränstemperatur | 85 °C |
| Lägre gränstemperatur | -40 °C |
| Märkström (40°C) | 7 A |
| Märkspänning | 250 V |
| Märksstötsspänning | 1500 V |
| Föroreningsgrad | 1 |
| Överspänningskategori | I |
| Isolermaterialgrupp | III |
| Resistans | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Kontaktmaterial | CuSn (bronze) |
| Kontaktplätering | Au (gold) |
| Kontaktkroppsmaterial | PBT (UL 94 V-0) |
| Kontakthusmaterial | PA |
| Customs tariff number | 85369010 |
| Weight (g) | 16.586 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- The connector is not suitable for mains voltages. Please observe the pollution degrees and the overvoltage category. For further information refer to ‘Technical support’ in the Download Centre.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
Nedladdningar
Produktblad
CAD-filer
09 0138 70 04
M16 IP40 female angled connector, Contacts: 4, 4,0 - 6,0 mm, Shielding is not possible, solder, IP40
M16, series 682, Miniature connectors
| Beställningsnummer |
09 0138 70 04
|
| Kontaktdonslåsning | bolted |
| Anslutning | solder |
| Tvärsnitt (mm) | 0.75 mm² |
| Tvärsnitt (AWG) | 18 |
| Kabeluttag | 4,0 - 6,0 mm |
| Kapslingsklass | IP40 |
| Mekanisk livslängd | > 500 Mating cycles |
| Övre gränstemperatur | 85 °C |
| Lägre gränstemperatur | -40 °C |
| Märkström (40°C) | 6 A |
| Märkspänning | 250 V |
| Märksstötsspänning | 1500 V |
| Föroreningsgrad | 1 |
| Överspänningskategori | I |
| Isolermaterialgrupp | III |
| Resistans | ≤ 5 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Kontaktmaterial | CuSn (bronze) |
| Kontaktplätering | Ag (silver) |
| Kontaktkroppsmaterial | PBT (UL 94 V-0) |
| Kontakthusmaterial | PA |
| Customs tariff number | 85369010 |
| Weight (g) | 16.769 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- The connector is not suitable for mains voltages. Please observe the pollution degrees and the overvoltage category. For further information refer to ‘Technical support’ in the Download Centre.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
Nedladdningar
Produktblad
CAD-filer
09 0138 79 04
M16 IP40 female angled connector, Contacts: 4, 4,0 - 6,0 mm, Shielding is not possible, solder, IP40
M16, series 682, Miniature connectors
| Beställningsnummer |
09 0138 79 04
|
| Kontaktdonslåsning | bolted |
| Anslutning | solder |
| Tvärsnitt (mm) | 0.75 mm² |
| Tvärsnitt (AWG) | 18 |
| Kabeluttag | 4,0 - 6,0 mm |
| Kapslingsklass | IP40 |
| Mekanisk livslängd | > 500 Mating cycles |
| Övre gränstemperatur | 85 °C |
| Lägre gränstemperatur | -40 °C |
| Märkström (40°C) | 6 A |
| Märkspänning | 250 V |
| Märksstötsspänning | 1500 V |
| Föroreningsgrad | 1 |
| Överspänningskategori | I |
| Isolermaterialgrupp | III |
| Resistans | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Kontaktmaterial | CuSn (bronze) |
| Kontaktplätering | Au (gold) |
| Kontaktkroppsmaterial | PBT (UL 94 V-0) |
| Kontakthusmaterial | PA |
| Customs tariff number | 85369010 |
| Weight (g) | 16.769 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- The connector is not suitable for mains voltages. Please observe the pollution degrees and the overvoltage category. For further information refer to ‘Technical support’ in the Download Centre.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
Nedladdningar
Produktblad
CAD-filer
09 0140 70 05
M16 IP40 female angled connector, Contacts: 5, 4,0 - 6,0 mm, Shielding is not possible, solder, IP40
M16, series 682, Miniature connectors
| Beställningsnummer |
09 0140 70 05
|
| Kontaktdonslåsning | bolted |
| Anslutning | solder |
| Tvärsnitt (mm) | 0.75 mm² |
| Tvärsnitt (AWG) | 18 |
| Kabeluttag | 4,0 - 6,0 mm |
| Kapslingsklass | IP40 |
| Mekanisk livslängd | > 500 Mating cycles |
| Övre gränstemperatur | 85 °C |
| Lägre gränstemperatur | -40 °C |
| Märkström (40°C) | 6 A |
| Märkspänning | 250 V |
| Märksstötsspänning | 1500 V |
| Föroreningsgrad | 1 |
| Överspänningskategori | I |
| Isolermaterialgrupp | III |
| Resistans | ≤ 5 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Kontaktmaterial | CuSn (bronze) |
| Kontaktplätering | Ag (silver) |
| Kontaktkroppsmaterial | PBT (UL 94 V-0) |
| Kontakthusmaterial | PA |
| Customs tariff number | 85369010 |
| Weight (g) | 16.863 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- The connector is not suitable for mains voltages. Please observe the pollution degrees and the overvoltage category. For further information refer to ‘Technical support’ in the Download Centre.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
Nedladdningar
Produktblad
CAD-filer
09 0140 79 05
M16 IP40 female angled connector, Contacts: 5, 4,0 - 6,0 mm, Shielding is not possible, solder, IP40
M16, series 682, Miniature connectors
| Beställningsnummer |
09 0140 79 05
|
| Kontaktdonslåsning | bolted |
| Anslutning | solder |
| Tvärsnitt (mm) | 0.75 mm² |
| Tvärsnitt (AWG) | 18 |
| Kabeluttag | 4,0 - 6,0 mm |
| Kapslingsklass | IP40 |
| Mekanisk livslängd | > 500 Mating cycles |
| Övre gränstemperatur | 85 °C |
| Lägre gränstemperatur | -40 °C |
| Märkström (40°C) | 6 A |
| Märkspänning | 250 V |
| Märksstötsspänning | 1500 V |
| Föroreningsgrad | 1 |
| Överspänningskategori | I |
| Isolermaterialgrupp | III |
| Resistans | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Kontaktmaterial | CuSn (bronze) |
| Kontaktplätering | Au (gold) |
| Kontaktkroppsmaterial | PBT (UL 94 V-0) |
| Kontakthusmaterial | PA |
| Customs tariff number | 85369010 |
| Weight (g) | 16.863 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- The connector is not suitable for mains voltages. Please observe the pollution degrees and the overvoltage category. For further information refer to ‘Technical support’ in the Download Centre.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
Nedladdningar
Produktblad
CAD-filer
09 0142 70 05
M16 IP40 female angled connector, Contacts: 5 (stereo), 4,0 - 6,0 mm, Shielding is not possible, solder, IP40
M16, series 682, Miniature connectors
| Beställningsnummer |
09 0142 70 05
|
| Kontaktdonslåsning | bolted |
| Anslutning | solder |
| Tvärsnitt (mm) | 0.75 mm² |
| Tvärsnitt (AWG) | 18 |
| Kabeluttag | 4,0 - 6,0 mm |
| Kapslingsklass | IP40 |
| Mekanisk livslängd | > 500 Mating cycles |
| Övre gränstemperatur | 85 °C |
| Lägre gränstemperatur | -40 °C |
| Märkström (40°C) | 6 A |
| Märkspänning | 60 V |
| Märksstötsspänning | 500 V |
| Föroreningsgrad | 1 |
| Överspänningskategori | I |
| Isolermaterialgrupp | III |
| Resistans | ≤ 5 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Kontaktmaterial | CuSn (bronze) |
| Kontaktplätering | Ag (silver) |
| Kontaktkroppsmaterial | PBT (UL 94 V-0) |
| Kontakthusmaterial | PA |
| Customs tariff number | 85369010 |
| Weight (g) | 16.483 |
Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
Nedladdningar
Produktblad
CAD-filer
09 0142 79 05
M16 IP40 female angled connector, Contacts: 5 (stereo), 4,0 - 6,0 mm, Shielding is not possible, solder, IP40
M16, series 682, Miniature connectors
| Beställningsnummer |
09 0142 79 05
|
| Kontaktdonslåsning | bolted |
| Anslutning | solder |
| Tvärsnitt (mm) | 0.75 mm² |
| Tvärsnitt (AWG) | 18 |
| Kabeluttag | 4,0 - 6,0 mm |
| Kapslingsklass | IP40 |
| Mekanisk livslängd | > 500 Mating cycles |
| Övre gränstemperatur | 85 °C |
| Lägre gränstemperatur | -40 °C |
| Märkström (40°C) | 6 A |
| Märkspänning | 60 V |
| Märksstötsspänning | 500 V |
| Föroreningsgrad | 1 |
| Överspänningskategori | I |
| Isolermaterialgrupp | III |
| Resistans | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Kontaktmaterial | CuSn (bronze) |
| Kontaktplätering | Au (gold) |
| Kontaktkroppsmaterial | PBT (UL 94 V-0) |
| Kontakthusmaterial | PA |
| Customs tariff number | 85369010 |
| Weight (g) | 18.5 |
Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
Nedladdningar
Produktblad
CAD-filer
09 0144 70 06
M16 IP40 female angled connector, Contacts: 6 DIN, 4,0 - 6,0 mm, Shielding is not possible, solder, IP40
M16, series 682, Miniature connectors
| Beställningsnummer |
09 0144 70 06
|
| Kontaktdonslåsning | bolted |
| Anslutning | solder |
| Tvärsnitt (mm) | 0.75 mm² |
| Tvärsnitt (AWG) | 18 |
| Kabeluttag | 4,0 - 6,0 mm |
| Kapslingsklass | IP40 |
| Mekanisk livslängd | > 500 Mating cycles |
| Övre gränstemperatur | 85 °C |
| Lägre gränstemperatur | -40 °C |
| Märkström (40°C) | 5 A |
| Märkspänning | 250 V |
| Märksstötsspänning | 1500 V |
| Föroreningsgrad | 1 |
| Överspänningskategori | I |
| Isolermaterialgrupp | III |
| Resistans | ≤ 5 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Kontaktmaterial | CuSn (bronze) |
| Kontaktplätering | Ag (silver) |
| Kontaktkroppsmaterial | PBT (UL 94 V-0) |
| Kontakthusmaterial | PA |
| Customs tariff number | 85369010 |
| Weight (g) | 17.069 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- The connector is not suitable for mains voltages. Please observe the pollution degrees and the overvoltage category. For further information refer to ‘Technical support’ in the Download Centre.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
Nedladdningar
Produktblad
CAD-filer
09 0144 79 06
M16 IP40 female angled connector, Contacts: 6 DIN, 4,0 - 6,0 mm, Shielding is not possible, solder, IP40
M16, series 682, Miniature connectors
| Beställningsnummer |
09 0144 79 06
|
| Kontaktdonslåsning | bolted |
| Anslutning | solder |
| Tvärsnitt (mm) | 0.75 mm² |
| Tvärsnitt (AWG) | 18 |
| Kabeluttag | 4,0 - 6,0 mm |
| Kapslingsklass | IP40 |
| Mekanisk livslängd | > 500 Mating cycles |
| Övre gränstemperatur | 85 °C |
| Lägre gränstemperatur | -40 °C |
| Märkström (40°C) | 5 A |
| Märkspänning | 250 V |
| Märksstötsspänning | 1500 V |
| Föroreningsgrad | 1 |
| Överspänningskategori | I |
| Isolermaterialgrupp | III |
| Resistans | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Kontaktmaterial | CuSn (bronze) |
| Kontaktplätering | Au (gold) |
| Kontaktkroppsmaterial | PBT (UL 94 V-0) |
| Kontakthusmaterial | PA |
| Customs tariff number | 85369010 |
| Weight (g) | 17.069 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- The connector is not suitable for mains voltages. Please observe the pollution degrees and the overvoltage category. For further information refer to ‘Technical support’ in the Download Centre.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
Nedladdningar
Produktblad
CAD-filer
09 0146 70 07
M16 IP40 female angled connector, Contacts: 7, 4,0 - 6,0 mm, Shielding is not possible, solder, IP40
M16, series 682, Miniature connectors
| Beställningsnummer |
09 0146 70 07
|
| Kontaktdonslåsning | bolted |
| Anslutning | solder |
| Tvärsnitt (mm) | 0.75 mm² |
| Tvärsnitt (AWG) | 18 |
| Kabeluttag | 4,0 - 6,0 mm |
| Kapslingsklass | IP40 |
| Mekanisk livslängd | > 500 Mating cycles |
| Övre gränstemperatur | 85 °C |
| Lägre gränstemperatur | -40 °C |
| Märkström (40°C) | 5 A |
| Märkspänning | 125 V |
| Märksstötsspänning | 800 V |
| Föroreningsgrad | 1 |
| Överspänningskategori | I |
| Isolermaterialgrupp | III |
| Resistans | ≤ 5 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Kontaktmaterial | CuSn (bronze) |
| Kontaktplätering | Ag (silver) |
| Kontaktkroppsmaterial | PBT (UL 94 V-0) |
| Kontakthusmaterial | PA |
| Customs tariff number | 85369010 |
| Weight (g) | 17.173 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
Nedladdningar
Produktblad
CAD-filer
09 0146 79 07
M16 IP40 female angled connector, Contacts: 7, 4,0 - 6,0 mm, Shielding is not possible, solder, IP40
M16, series 682, Miniature connectors
| Beställningsnummer |
09 0146 79 07
|
| Kontaktdonslåsning | bolted |
| Anslutning | solder |
| Tvärsnitt (mm) | 0.75 mm² |
| Tvärsnitt (AWG) | 18 |
| Kabeluttag | 4,0 - 6,0 mm |
| Kapslingsklass | IP40 |
| Mekanisk livslängd | > 500 Mating cycles |
| Övre gränstemperatur | 85 °C |
| Lägre gränstemperatur | -40 °C |
| Märkström (40°C) | 5 A |
| Märkspänning | 125 V |
| Märksstötsspänning | 800 V |
| Föroreningsgrad | 1 |
| Överspänningskategori | I |
| Isolermaterialgrupp | III |
| Resistans | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Kontaktmaterial | CuSn (bronze) |
| Kontaktplätering | Au (gold) |
| Kontaktkroppsmaterial | PBT (UL 94 V-0) |
| Kontakthusmaterial | PA |
| Customs tariff number | 85369010 |
| Weight (g) | 17.173 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
Nedladdningar
Produktblad
CAD-filer
09 0178 70 07
M16 IP40 female angled connector, Contacts: 7 DIN, 4,0 - 6,0 mm, Shielding is not possible, solder, IP40
M16, series 682, Miniature connectors
| Beställningsnummer |
09 0178 70 07
|
| Kontaktdonslåsning | bolted |
| Anslutning | solder |
| Tvärsnitt (mm) | 0.75 mm² |
| Tvärsnitt (AWG) | 18 |
| Kabeluttag | 4,0 - 6,0 mm |
| Kapslingsklass | IP40 |
| Mekanisk livslängd | > 500 Mating cycles |
| Övre gränstemperatur | 85 °C |
| Lägre gränstemperatur | -40 °C |
| Märkström (40°C) | 5 A |
| Märkspänning | 60 V |
| Märksstötsspänning | 500 V |
| Föroreningsgrad | 1 |
| Överspänningskategori | I |
| Isolermaterialgrupp | III |
| Resistans | ≤ 5 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Kontaktmaterial | CuSn (bronze) |
| Kontaktplätering | Ag (silver) |
| Kontaktkroppsmaterial | PBT (UL 94 V-0) |
| Kontakthusmaterial | PA |
| Customs tariff number | 85369010 |
| Weight (g) | 16.547 |
Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
Nedladdningar
Produktblad
CAD-filer
09 0154 70 08
M16 IP40 female angled connector, Contacts: 8 DIN, 4,0 - 6,0 mm, Shielding is not possible, solder, IP40
M16, series 682, Miniature connectors
| Beställningsnummer |
09 0154 70 08
|
| Kontaktdonslåsning | bolted |
| Anslutning | solder |
| Tvärsnitt (mm) | 0.75 mm² |
| Tvärsnitt (AWG) | 18 |
| Kabeluttag | 4,0 - 6,0 mm |
| Kapslingsklass | IP40 |
| Mekanisk livslängd | > 500 Mating cycles |
| Övre gränstemperatur | 85 °C |
| Lägre gränstemperatur | -40 °C |
| Märkström (40°C) | 5 A |
| Märkspänning | 60 V |
| Märksstötsspänning | 500 V |
| Föroreningsgrad | 1 |
| Överspänningskategori | I |
| Isolermaterialgrupp | III |
| Resistans | ≤ 5 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Kontaktmaterial | CuSn (bronze) |
| Kontaktplätering | Ag (silver) |
| Kontaktkroppsmaterial | PBT (UL 94 V-0) |
| Kontakthusmaterial | PA |
| Customs tariff number | 85369010 |
| Weight (g) | 16.628 |
Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
Nedladdningar
Produktblad
CAD-filer
09 0154 79 08
M16 IP40 female angled connector, Contacts: 8 DIN, 4,0 - 6,0 mm, Shielding is not possible, solder, IP40
M16, series 682, Miniature connectors
| Beställningsnummer |
09 0154 79 08
|
| Kontaktdonslåsning | bolted |
| Anslutning | solder |
| Tvärsnitt (mm) | 0.75 mm² |
| Tvärsnitt (AWG) | 18 |
| Kabeluttag | 4,0 - 6,0 mm |
| Kapslingsklass | IP40 |
| Mekanisk livslängd | > 500 Mating cycles |
| Övre gränstemperatur | 85 °C |
| Lägre gränstemperatur | -40 °C |
| Märkström (40°C) | 5 A |
| Märkspänning | 60 V |
| Märksstötsspänning | 500 V |
| Föroreningsgrad | 1 |
| Överspänningskategori | I |
| Isolermaterialgrupp | III |
| Resistans | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Kontaktmaterial | CuSn (bronze) |
| Kontaktplätering | Au (gold) |
| Kontaktkroppsmaterial | PBT (UL 94 V-0) |
| Kontakthusmaterial | PA |
| Customs tariff number | 85369010 |
| Weight (g) | 16.636 |
Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
Nedladdningar
Produktblad
CAD-filer
09 0148 70 12
M16 IP40 female angled connector, Contacts: 12, 4,0 - 6,0 mm, Shielding is not possible, solder, IP40
M16, series 682, Miniature connectors
| Beställningsnummer |
09 0148 70 12
|
| Kontaktdonslåsning | bolted |
| Anslutning | solder |
| Tvärsnitt (mm) | 0.25 mm² |
| Tvärsnitt (AWG) | 24 |
| Kabeluttag | 4,0 - 6,0 mm |
| Kapslingsklass | IP40 |
| Mekanisk livslängd | > 500 Mating cycles |
| Övre gränstemperatur | 85 °C |
| Lägre gränstemperatur | -40 °C |
| Märkström (40°C) | 3 A |
| Märkspänning | 60 V |
| Märksstötsspänning | 500 V |
| Föroreningsgrad | 1 |
| Överspänningskategori | I |
| Isolermaterialgrupp | III |
| Resistans | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Kontaktmaterial | CuSn (bronze) |
| Kontaktplätering | Au (gold) |
| Kontaktkroppsmaterial | PBT (UL 94 V-0) |
| Kontakthusmaterial | PA |
| Customs tariff number | 85369010 |
| Weight (g) | 16.655 |
Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
Nedladdningar
Produktblad
CAD-filer
09 0162 70 14
M16 IP40 female angled connector, Contacts: 14, 4,0 - 6,0 mm, Shielding is not possible, solder, IP40
M16, series 682, Miniature connectors
| Beställningsnummer |
09 0162 70 14
|
| Kontaktdonslåsning | bolted |
| Anslutning | solder |
| Tvärsnitt (mm) | 0.25 mm² |
| Tvärsnitt (AWG) | 24 |
| Kabeluttag | 4,0 - 6,0 mm |
| Kapslingsklass | IP40 |
| Mekanisk livslängd | > 500 Mating cycles |
| Övre gränstemperatur | 85 °C |
| Lägre gränstemperatur | -40 °C |
| Märkström (40°C) | 3 A |
| Märkspänning | 60 V |
| Märksstötsspänning | 500 V |
| Föroreningsgrad | 1 |
| Överspänningskategori | I |
| Isolermaterialgrupp | III |
| Resistans | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Kontaktmaterial | CuSn (bronze) |
| Kontaktplätering | Au (gold) |
| Kontaktkroppsmaterial | PBT (UL 94 V-0) |
| Kontakthusmaterial | PA |
| Customs tariff number | 85369010 |
| Weight (g) | 16.773 |
Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
Nedladdningar
Produktblad
CAD-filer
09 0186 70 16
M16 IP40 female angled connector, Contacts: 16, 4,0 - 6,0 mm, Shielding is not possible, solder, IP40
M16, series 682, Miniature connectors
| Beställningsnummer |
09 0186 70 16
|
| Kontaktdonslåsning | bolted |
| Anslutning | solder |
| Tvärsnitt (mm) | 0.25 mm² |
| Tvärsnitt (AWG) | 24 |
| Kabeluttag | 4,0 - 6,0 mm |
| Kapslingsklass | IP40 |
| Mekanisk livslängd | > 500 Mating cycles |
| Övre gränstemperatur | 85 °C |
| Lägre gränstemperatur | -40 °C |
| Märkström (40°C) | 3 A |
| Märkspänning | 60 V |
| Märksstötsspänning | 500 V |
| Föroreningsgrad | 1 |
| Överspänningskategori | I |
| Isolermaterialgrupp | III |
| Resistans | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Kontaktmaterial | CuSn (bronze) |
| Kontaktplätering | Au (gold) |
| Kontaktkroppsmaterial | PBT (UL 94 V-0) |
| Kontakthusmaterial | PA |
| Customs tariff number | 85369010 |
| Weight (g) | 16.899 |
Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
Nedladdningar
Produktblad
09 0164 70 19
M16 IP40 female angled connector, Contacts: 19, 4,0 - 6,0 mm, Shielding is not possible, solder, IP40
M16, series 682, Miniature connectors
| Beställningsnummer |
09 0164 70 19
|
| Kontaktdonslåsning | bolted |
| Anslutning | solder |
| Tvärsnitt (mm) | 0.25 mm² |
| Tvärsnitt (AWG) | 24 |
| Kabeluttag | 4,0 - 6,0 mm |
| Kapslingsklass | IP40 |
| Mekanisk livslängd | > 500 Mating cycles |
| Övre gränstemperatur | 85 °C |
| Lägre gränstemperatur | -40 °C |
| Märkström (40°C) | 3 A |
| Märkspänning | 60 V |
| Märksstötsspänning | 500 V |
| Föroreningsgrad | 1 |
| Överspänningskategori | I |
| Isolermaterialgrupp | III |
| Resistans | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Kontaktmaterial | CuSn (bronze) |
| Kontaktplätering | Au (gold) |
| Kontaktkroppsmaterial | PBT (UL 94 V-0) |
| Kontakthusmaterial | PA |
| Customs tariff number | 85369010 |
| Weight (g) | 17.054 |
Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
Nedladdningar
Produktblad
Contact to customer service
Do you have any questions regarding our products or do you wish an individual offer?