Ordering no:
Female cable connector, cable outlet 4-6 mm
Female cable connector, cable outlet 4-6 mm, Serier 723
Available numbers of contacts
Variants for number of contacts 2
Variants for number of contacts 3
Variants for number of contacts 4
Variants for number of contacts 5
Variants for number of contacts 6
Variants for number of contacts 7
Variants for number of contacts 8
Variants for number of contacts 12
Variants for number of contacts 16
Variants for number of contacts 19
Variants for number of contacts 24
09 0102 25 02
M16 IP67 female cable connector, Contacts: 2, 4,0 - 6,0 mm, Shielding is not possible, solder, IP67
M16, series 723, Miniature connectors
| Beställningsnummer |
09 0102 25 02
|
| Kontaktdonslåsning | bolted |
| Anslutning | solder |
| Tvärsnitt (mm) | 0,75 mm² |
| Tvärsnitt (AWG) | 20 |
| Kabeluttag | 4,0 - 6,0 mm |
| Kapslingsklass | IP67 |
| Mekanisk livslängd | > 500 Mating cycles |
| Övre gränstemperatur | 95 °C |
| Lägre gränstemperatur | -40 °C |
| Märkström (40°C) | 7 A |
| Märkspänning | 250 V |
| Märksstötsspänning | 1500 V |
| Föroreningsgrad | 1 |
| Överspänningskategori | I |
| Isolermaterialgrupp | III |
| Resistans | ≤ 5 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Kontaktmaterial | CuSn (bronze) |
| Kontaktplätering | Ag (silver) |
| Kontaktkroppsmaterial | PBT (UL 94 V-0) |
| Customs tariff number | 85369010 |
| Weight (g) | 40.637 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
- The connector is not suitable for mains voltages. Please observe the pollution degrees and the overvoltage category. For further information refer to ‘Technical support’ in the Download Centre.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
Nedladdningar
Produktblad
CAD-filer
09 0106 25 03
M16 IP67 female cable connector, Contacts: 3, 4,0 - 6,0 mm, Shielding is not possible, solder, IP67
M16, series 723, Miniature connectors
| Beställningsnummer |
09 0106 25 03
|
| Kontaktdonslåsning | bolted |
| Anslutning | solder |
| Tvärsnitt (mm) | 0,75 mm² |
| Tvärsnitt (AWG) | 20 |
| Kabeluttag | 4,0 - 6,0 mm |
| Kapslingsklass | IP67 |
| Mekanisk livslängd | > 500 Mating cycles |
| Övre gränstemperatur | 95 °C |
| Lägre gränstemperatur | -40 °C |
| Märkström (40°C) | 7 A |
| Märkspänning | 250 V |
| Märksstötsspänning | 1500 V |
| Föroreningsgrad | 1 |
| Överspänningskategori | I |
| Isolermaterialgrupp | III |
| Resistans | ≤ 5 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Kontaktmaterial | CuSn (bronze) |
| Kontaktplätering | Ag (silver) |
| Kontaktkroppsmaterial | PBT (UL 94 V-0) |
| Customs tariff number | 85369010 |
| Weight (g) | 40.761 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
- The connector is not suitable for mains voltages. Please observe the pollution degrees and the overvoltage category. For further information refer to ‘Technical support’ in the Download Centre.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
Nedladdningar
Produktblad
CAD-filer
09 0106 19 03
M16 IP67 female cable connector, Contacts: 3, 4,0 - 6,0 mm, Shielding is not possible, solder, IP67
M16, series 723, Miniature connectors
| Beställningsnummer |
09 0106 19 03
|
| Kontaktdonslåsning | bolted |
| Anslutning | solder |
| Tvärsnitt (mm) | 0,75 mm² |
| Tvärsnitt (AWG) | 20 |
| Kabeluttag | 4,0 - 6,0 mm |
| Kapslingsklass | IP67 |
| Mekanisk livslängd | > 500 Mating cycles |
| Övre gränstemperatur | 95 °C |
| Lägre gränstemperatur | -40 °C |
| Märkström (40°C) | 7 A |
| Märkspänning | 250 V |
| Märksstötsspänning | 1500 V |
| Föroreningsgrad | 1 |
| Överspänningskategori | I |
| Isolermaterialgrupp | III |
| Resistans | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Kontaktmaterial | CuSn (bronze) |
| Kontaktplätering | Au (gold) |
| Kontaktkroppsmaterial | PBT (UL 94 V-0) |
| Customs tariff number | 85369010 |
| Weight (g) | 40.761 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
- The connector is not suitable for mains voltages. Please observe the pollution degrees and the overvoltage category. For further information refer to ‘Technical support’ in the Download Centre.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
Nedladdningar
Produktblad
CAD-filer
09 0110 25 04
M16 IP67 female cable connector, Contacts: 4, 4,0 - 6,0 mm, Shielding is not possible, solder, IP67
M16, series 723, Miniature connectors
| Beställningsnummer |
09 0110 25 04
|
| Kontaktdonslåsning | bolted |
| Anslutning | solder |
| Tvärsnitt (mm) | 0,75 mm² |
| Tvärsnitt (AWG) | 20 |
| Kabeluttag | 4,0 - 6,0 mm |
| Kapslingsklass | IP67 |
| Mekanisk livslängd | > 500 Mating cycles |
| Övre gränstemperatur | 95 °C |
| Lägre gränstemperatur | -40 °C |
| Märkström (40°C) | 6 A |
| Märkspänning | 250 V |
| Märksstötsspänning | 1500 V |
| Föroreningsgrad | 1 |
| Överspänningskategori | I |
| Isolermaterialgrupp | III |
| Resistans | ≤ 5 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Kontaktmaterial | CuSn (bronze) |
| Kontaktplätering | Ag (silver) |
| Kontaktkroppsmaterial | PBT (UL 94 V-0) |
| Customs tariff number | 85369010 |
| Weight (g) | 40.944 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
- The connector is not suitable for mains voltages. Please observe the pollution degrees and the overvoltage category. For further information refer to ‘Technical support’ in the Download Centre.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
Nedladdningar
Produktblad
CAD-filer
09 0110 19 04
M16 IP67 female cable connector, Contacts: 4, 4,0 - 6,0 mm, Shielding is not possible, solder, IP67
M16, series 723, Miniature connectors
| Beställningsnummer |
09 0110 19 04
|
| Kontaktdonslåsning | bolted |
| Anslutning | solder |
| Tvärsnitt (mm) | 0,75 mm² |
| Tvärsnitt (AWG) | 20 |
| Kabeluttag | 4,0 - 6,0 mm |
| Kapslingsklass | IP67 |
| Mekanisk livslängd | > 500 Mating cycles |
| Övre gränstemperatur | 95 °C |
| Lägre gränstemperatur | -40 °C |
| Märkström (40°C) | 6 A |
| Märkspänning | 250 V |
| Märksstötsspänning | 1500 V |
| Föroreningsgrad | 1 |
| Överspänningskategori | I |
| Isolermaterialgrupp | III |
| Resistans | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Kontaktmaterial | CuSn (bronze) |
| Kontaktplätering | Au (gold) |
| Kontaktkroppsmaterial | PBT (UL 94 V-0) |
| Customs tariff number | 85369010 |
| Weight (g) | 40.944 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
- The connector is not suitable for mains voltages. Please observe the pollution degrees and the overvoltage category. For further information refer to ‘Technical support’ in the Download Centre.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
Nedladdningar
Produktblad
CAD-filer
09 0118 25 05
M16 IP67 female cable connector, Contacts: 5, 4,0 - 6,0 mm, Shielding is not possible, solder, IP67
M16, series 723, Miniature connectors
| Beställningsnummer |
09 0118 25 05
|
| Kontaktdonslåsning | bolted |
| Anslutning | solder |
| Tvärsnitt (mm) | 0,75 mm² |
| Tvärsnitt (AWG) | 20 |
| Kabeluttag | 4,0 - 6,0 mm |
| Kapslingsklass | IP67 |
| Mekanisk livslängd | > 500 Mating cycles |
| Övre gränstemperatur | 95 °C |
| Lägre gränstemperatur | -40 °C |
| Märkström (40°C) | 6 A |
| Märkspänning | 60 V |
| Märksstötsspänning | 500 V |
| Föroreningsgrad | 1 |
| Överspänningskategori | I |
| Isolermaterialgrupp | III |
| Resistans | ≤ 5 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Kontaktmaterial | CuSn (bronze) |
| Kontaktplätering | Ag (silver) |
| Kontaktkroppsmaterial | PBT (UL 94 V-0) |
| Customs tariff number | 85369010 |
| Weight (g) | 40.658 |
Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
Nedladdningar
Produktblad
CAD-filer
09 0118 19 05
M16 IP67 female cable connector, Contacts: 5, 4,0 - 6,0 mm, Shielding is not possible, solder, IP67
M16, series 723, Miniature connectors
| Beställningsnummer |
09 0118 19 05
|
| Kontaktdonslåsning | bolted |
| Anslutning | solder |
| Tvärsnitt (mm) | 0,75 mm² |
| Tvärsnitt (AWG) | 20 |
| Kabeluttag | 4,0 - 6,0 mm |
| Kapslingsklass | IP67 |
| Mekanisk livslängd | > 500 Mating cycles |
| Övre gränstemperatur | 95 °C |
| Lägre gränstemperatur | -40 °C |
| Märkström (40°C) | 6 A |
| Märkspänning | 60 V |
| Märksstötsspänning | 500 V |
| Föroreningsgrad | 1 |
| Överspänningskategori | I |
| Isolermaterialgrupp | III |
| Resistans | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Kontaktmaterial | CuSn (bronze) |
| Kontaktplätering | Au (gold) |
| Kontaktkroppsmaterial | PBT (UL 94 V-0) |
| Customs tariff number | 85369010 |
| Weight (g) | 43.5 |
Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
Nedladdningar
Produktblad
CAD-filer
09 0122 25 06
M16 IP67 female cable connector, Contacts: 6, 4,0 - 6,0 mm, Shielding is not possible, solder, IP67
M16, series 723, Miniature connectors
| Beställningsnummer |
09 0122 25 06
|
| Kontaktdonslåsning | bolted |
| Anslutning | solder |
| Tvärsnitt (mm) | 0,75 mm² |
| Tvärsnitt (AWG) | 20 |
| Kabeluttag | 4,0 - 6,0 mm |
| Kapslingsklass | IP67 |
| Mekanisk livslängd | > 500 Mating cycles |
| Övre gränstemperatur | 95 °C |
| Lägre gränstemperatur | -40 °C |
| Märkström (40°C) | 5 A |
| Märkspänning | 250 V |
| Märksstötsspänning | 1500 V |
| Föroreningsgrad | 1 |
| Överspänningskategori | I |
| Isolermaterialgrupp | III |
| Resistans | ≤ 5 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Kontaktmaterial | CuSn (bronze) |
| Kontaktplätering | Ag (silver) |
| Kontaktkroppsmaterial | PBT (UL 94 V-0) |
| Customs tariff number | 85369010 |
| Weight (g) | 41.244 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
- The connector is not suitable for mains voltages. Please observe the pollution degrees and the overvoltage category. For further information refer to ‘Technical support’ in the Download Centre.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
Nedladdningar
Produktblad
CAD-filer
09 0122 19 06
M16 IP67 female cable connector, Contacts: 6, 4,0 - 6,0 mm, Shielding is not possible, solder, IP67
M16, series 723, Miniature connectors
| Beställningsnummer |
09 0122 19 06
|
| Kontaktdonslåsning | bolted |
| Anslutning | solder |
| Tvärsnitt (mm) | 0,75 mm² |
| Tvärsnitt (AWG) | 20 |
| Kabeluttag | 4,0 - 6,0 mm |
| Kapslingsklass | IP67 |
| Mekanisk livslängd | > 500 Mating cycles |
| Övre gränstemperatur | 95 °C |
| Lägre gränstemperatur | -40 °C |
| Märkström (40°C) | 5 A |
| Märkspänning | 250 V |
| Märksstötsspänning | 1500 V |
| Föroreningsgrad | 1 |
| Överspänningskategori | I |
| Isolermaterialgrupp | III |
| Resistans | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Kontaktmaterial | CuSn (bronze) |
| Kontaktplätering | Au (gold) |
| Kontaktkroppsmaterial | PBT (UL 94 V-0) |
| Customs tariff number | 85369010 |
| Weight (g) | 41.244 |
Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
- The connector is not suitable for mains voltages. Please observe the pollution degrees and the overvoltage category. For further information refer to ‘Technical support’ in the Download Centre.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
Nedladdningar
Produktblad
CAD-filer
09 0582 25 07
M16 IP67 female cable connector, Contacts: 7, 4,0 - 6,0 mm, Shielding is not possible, solder, IP67
M16, series 723, Miniature connectors
| Beställningsnummer |
09 0582 25 07
|
| Kontaktdonslåsning | bolted |
| Anslutning | solder |
| Tvärsnitt (mm) | 0,75 mm² |
| Tvärsnitt (AWG) | 20 |
| Kabeluttag | 4,0 - 6,0 mm |
| Kapslingsklass | IP67 |
| Mekanisk livslängd | > 500 Mating cycles |
| Övre gränstemperatur | 95 °C |
| Lägre gränstemperatur | -40 °C |
| Märkström (40°C) | 5 A |
| Märkspänning | 60 V |
| Märksstötsspänning | 500 V |
| Föroreningsgrad | 1 |
| Överspänningskategori | I |
| Isolermaterialgrupp | III |
| Resistans | ≤ 5 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Kontaktmaterial | CuSn (bronze) |
| Kontaktplätering | Ag (silver) |
| Kontaktkroppsmaterial | PBT (UL 94 V-0) |
| Customs tariff number | 85369010 |
| Weight (g) | 40.722 |
Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
Nedladdningar
Produktblad
CAD-filer
09 0172 25 08
M16 IP67 female cable connector, Contacts: 8, 4,0 - 6,0 mm, Shielding is not possible, solder, IP67
M16, series 723, Miniature connectors
| Beställningsnummer |
09 0172 25 08
|
| Kontaktdonslåsning | bolted |
| Anslutning | solder |
| Tvärsnitt (mm) | 0,75 mm² |
| Tvärsnitt (AWG) | 20 |
| Kabeluttag | 4,0 - 6,0 mm |
| Kapslingsklass | IP67 |
| Mekanisk livslängd | > 500 Mating cycles |
| Övre gränstemperatur | 95 °C |
| Lägre gränstemperatur | -40 °C |
| Märkström (40°C) | 5 A |
| Märkspänning | 60 V |
| Märksstötsspänning | 500 V |
| Föroreningsgrad | 1 |
| Överspänningskategori | I |
| Isolermaterialgrupp | III |
| Resistans | ≤ 5 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Kontaktmaterial | CuSn (bronze) |
| Kontaktplätering | Ag (silver) |
| Kontaktkroppsmaterial | PBT (UL 94 V-0) |
| Customs tariff number | 85369010 |
| Weight (g) | 40.83 |
Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
Nedladdningar
Produktblad
CAD-filer
09 0172 19 08
M16 IP67 female cable connector, Contacts: 8, 4,0 - 6,0 mm, Shielding is not possible, solder, IP67
M16, series 723, Miniature connectors
| Beställningsnummer |
09 0172 19 08
|
| Kontaktdonslåsning | bolted |
| Anslutning | solder |
| Tvärsnitt (mm) | 0,75 mm² |
| Tvärsnitt (AWG) | 20 |
| Kabeluttag | 4,0 - 6,0 mm |
| Kapslingsklass | IP67 |
| Mekanisk livslängd | > 500 Mating cycles |
| Övre gränstemperatur | 95 °C |
| Lägre gränstemperatur | -40 °C |
| Märkström (40°C) | 5 A |
| Märkspänning | 60 V |
| Märksstötsspänning | 500 V |
| Föroreningsgrad | 1 |
| Överspänningskategori | I |
| Isolermaterialgrupp | III |
| Resistans | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Kontaktmaterial | CuSn (bronze) |
| Kontaktplätering | Au (gold) |
| Kontaktkroppsmaterial | PBT (UL 94 V-0) |
| Customs tariff number | 85369010 |
| Weight (g) | 40.799 |
Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
Nedladdningar
Produktblad
CAD-filer
09 0130 25 12
M16 IP67 female cable connector, Contacts: 12, 4,0 - 6,0 mm, Shielding is not possible, solder, IP67
M16, series 723, Miniature connectors
| Beställningsnummer |
09 0130 25 12
|
| Kontaktdonslåsning | bolted |
| Anslutning | solder |
| Tvärsnitt (mm) | 0,25 mm² |
| Tvärsnitt (AWG) | 24 |
| Kabeluttag | 4,0 - 6,0 mm |
| Kapslingsklass | IP67 |
| Mekanisk livslängd | > 500 Mating cycles |
| Övre gränstemperatur | 95 °C |
| Lägre gränstemperatur | -40 °C |
| Märkström (40°C) | 3 A |
| Märkspänning | 60 V |
| Märksstötsspänning | 500 V |
| Föroreningsgrad | 1 |
| Överspänningskategori | I |
| Isolermaterialgrupp | III |
| Resistans | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Kontaktmaterial | CuSn (bronze) |
| Kontaktplätering | Au (gold) |
| Kontaktkroppsmaterial | PBT (UL 94 V-0) |
| Customs tariff number | 85369010 |
| Weight (g) | 40.83 |
Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
Nedladdningar
Produktblad
CAD-filer
09 0506 25 16
M16 IP67 female cable connector, Contacts: 16, 4,0 - 6,0 mm, Shielding is not possible, solder, IP67
M16, series 723, Miniature connectors
| Beställningsnummer |
09 0506 25 16
|
| Kontaktdonslåsning | bolted |
| Anslutning | solder |
| Tvärsnitt (mm) | 0,25 mm² |
| Tvärsnitt (AWG) | 24 |
| Kabeluttag | 4,0 - 6,0 mm |
| Kapslingsklass | IP67 |
| Mekanisk livslängd | > 500 Mating cycles |
| Övre gränstemperatur | 95 °C |
| Lägre gränstemperatur | -40 °C |
| Märkström (40°C) | 3 A |
| Märkspänning | 60 V |
| Märksstötsspänning | 500 V |
| Föroreningsgrad | 1 |
| Överspänningskategori | I |
| Isolermaterialgrupp | III |
| Resistans | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Kontaktmaterial | CuSn (bronze) |
| Kontaktplätering | Au (gold) |
| Kontaktkroppsmaterial | PBT (UL 94 V-0) |
| Customs tariff number | 85369010 |
| Weight (g) | 41.074 |
Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
Nedladdningar
Produktblad
CAD-filer
09 0462 25 19
M16 IP67 female cable connector, Contacts: 19, 4,0 - 6,0 mm, Shielding is not possible, solder, IP67
M16, series 723, Miniature connectors
| Beställningsnummer |
09 0462 25 19
|
| Kontaktdonslåsning | bolted |
| Anslutning | solder |
| Tvärsnitt (mm) | 0,25 mm² |
| Tvärsnitt (AWG) | 24 |
| Kabeluttag | 4,0 - 6,0 mm |
| Kapslingsklass | IP67 |
| Mekanisk livslängd | > 500 Mating cycles |
| Övre gränstemperatur | 95 °C |
| Lägre gränstemperatur | -40 °C |
| Märkström (40°C) | 3 A |
| Märkspänning | 60 V |
| Märksstötsspänning | 500 V |
| Föroreningsgrad | 1 |
| Överspänningskategori | I |
| Isolermaterialgrupp | III |
| Resistans | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Kontaktmaterial | CuSn (bronze) |
| Kontaktplätering | Au (gold) |
| Kontaktkroppsmaterial | PBT (UL 94 V-0) |
| Customs tariff number | 85369010 |
| Weight (g) | 41.229 |
Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
Nedladdningar
Produktblad
CAD-filer
09 0496 25 24
M16 IP67 female cable connector, Contacts: 24, 4,0 - 6,0 mm, Shielding is not possible, solder, IP67
M16, series 723, Miniature connectors
| Beställningsnummer |
09 0496 25 24
|
| Kontaktdonslåsning | bolted |
| Anslutning | solder |
| Tvärsnitt (mm) | 0,14 mm² |
| Tvärsnitt (AWG) | 26 |
| Kabeluttag | 4,0 - 6,0 mm |
| Kapslingsklass | IP67 |
| Mekanisk livslängd | > 500 Mating cycles |
| Övre gränstemperatur | 95 °C |
| Lägre gränstemperatur | -40 °C |
| Märkström (40°C) | 1 A |
| Märkspänning | 60 V |
| Märksstötsspänning | 500 V |
| Föroreningsgrad | 1 |
| Överspänningskategori | I |
| Isolermaterialgrupp | III |
| Resistans | ≤ 3 mΩ |
| Insulation resistance | ≥ 10¹⁰Ω |
| Kontaktmaterial | CuSn (bronze) |
| Kontaktplätering | Au (gold) |
| Kontaktkroppsmaterial | PBT (UL 94 V-0) |
| Customs tariff number | 85369010 |
| Weight (g) | 41.101 |
Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
- To lock the cable connector to the equipment connector, the threaded ring is tightened until it is ‘finger-tight’ (approx. 50 cNm).
Nedladdningar
Produktblad
CAD-filer
Contact to customer service
Do you have any questions regarding our products or do you wish an individual offer?