Available numbers of contacts
99 9105 50 03
Snap-In IP67 cable connector, Contacts: 3, 4,0 - 6,0 mm, Shielding is not possible, solder, IP67, VDE
Snap In, series 720, Miniature connectors
Beställningsnummer |
99 9105 50 03
|
Kontaktdonslåsning | snap |
Anslutning | solder |
Tvärsnitt (mm) | 0.75 mm² |
Tvärsnitt (AWG) | 20 |
Kabeluttag | 4,0 - 6,0 mm |
Kapslingsklass | IP67 |
Mekanisk livslängd | > 500 Mating cycles |
Övre gränstemperatur | 85 °C |
Lägre gränstemperatur | -25 °C |
Märkström (40°C) | 7 A |
Märkspänning | 250 V |
Märksstötsspänning | 2500 V |
Föroreningsgrad | 2 |
Överspänningskategori | II |
Isolermaterialgrupp | II |
Resistans | ≤ 3 mΩ |
Insulation resistance | ≥ 10¹⁰Ω |
Kontaktmaterial | CuZn (brass) |
Kontaktplätering | Au (gold) |
Kontaktkroppsmaterial | PA (UL 94 V-0) |
Kontakthusmaterial | PA |
Godkännande 1 | VDE |
Customs tariff number | 85369010 |
Weight (g) | 8.536 |





Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- To prevent the connector being opened unintentionally when used in electrical circuits containing hazardous life parts, the thread between the housing and the connector head must be secured using a suitable cyanoacrylate adhesive. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1).
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
Nedladdningar
Produktblad
Certificates
CAD-filer
99 9113 50 05
Snap-In IP67 cable connector, Contacts: 5, 4,0 - 6,0 mm, Shielding is not possible, solder, IP67, VDE
Snap In, series 720, Miniature connectors
Beställningsnummer |
99 9113 50 05
|
Kontaktdonslåsning | snap |
Anslutning | solder |
Tvärsnitt (mm) | 0.75 mm² |
Tvärsnitt (AWG) | 20 |
Kabeluttag | 4,0 - 6,0 mm |
Kapslingsklass | IP67 |
Mekanisk livslängd | > 500 Mating cycles |
Övre gränstemperatur | 85 °C |
Lägre gränstemperatur | -25 °C |
Märkström (40°C) | 5 A |
Märkspänning | 125 V |
Märksstötsspänning | 1500 V |
Föroreningsgrad | 2 |
Överspänningskategori | II |
Isolermaterialgrupp | II |
Resistans | ≤ 3 mΩ |
Insulation resistance | ≥ 10¹⁰Ω |
Kontaktmaterial | CuZn (brass) |
Kontaktplätering | Au (gold) |
Kontaktkroppsmaterial | PA (UL 94 V-0) |
Kontakthusmaterial | PA |
Godkännande 1 | VDE |
Customs tariff number | 85369010 |
Weight (g) | 9.3 |





Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- To prevent the connector being opened unintentionally when used in electrical circuits containing hazardous life parts, the thread between the housing and the connector head must be secured using a suitable cyanoacrylate adhesive. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1).
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
Nedladdningar
Produktblad
Certificates
CAD-filer
99 9125 50 08
Snap-In IP67 cable connector, Contacts: 8, 4,0 - 6,0 mm, Shielding is not possible, solder, IP67, VDE
Snap In, series 720, Miniature connectors
Beställningsnummer |
99 9125 50 08
|
Kontaktdonslåsning | snap |
Anslutning | solder |
Tvärsnitt (mm) | 0.25 mm² |
Tvärsnitt (AWG) | 24 |
Kabeluttag | 4,0 - 6,0 mm |
Kapslingsklass | IP67 |
Mekanisk livslängd | > 500 Mating cycles |
Övre gränstemperatur | 85 °C |
Lägre gränstemperatur | -25 °C |
Märkström (40°C) | 2 A |
Märkspänning | 125 V |
Märksstötsspänning | 1500 V |
Föroreningsgrad | 2 |
Överspänningskategori | II |
Isolermaterialgrupp | II |
Resistans | ≤ 3 mΩ |
Insulation resistance | ≥ 10¹⁰Ω |
Kontaktmaterial | CuZn (brass) |
Kontaktplätering | Au (gold) |
Kontaktkroppsmaterial | PA (UL 94 V-0) |
Kontakthusmaterial | PA |
Godkännande 1 | VDE |
Customs tariff number | 85369010 |
Weight (g) | 8.4 |





Security notices
- The connector must not be connected or separated under load. Non-observance and incorrect use can result in personal injury.
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- To prevent the connector being opened unintentionally when used in electrical circuits containing hazardous life parts, the thread between the housing and the connector head must be secured using a suitable cyanoacrylate adhesive. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1).
- Connectors used in electrical circuits containing hazardous life parts must only be assembled and used by or under the supervision of persons with the requisite electrotechnical training, taking the applicable regulations and standards into account.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
Nedladdningar
Produktblad
Certificates
CAD-filer
99 9133 52 12
Snap-In IP67 cable connector, Contacts: 12, 6,0 - 8,0 mm, Shielding is not possible, solder, IP67, VDE
Snap In, series 720, Miniature connectors
Beställningsnummer |
99 9133 52 12
|
Kontaktdonslåsning | snap |
Anslutning | solder |
Tvärsnitt (mm) | 0.25 mm² |
Tvärsnitt (AWG) | 24 |
Kabeluttag | 6,0 - 8,0 mm |
Kapslingsklass | IP67 |
Mekanisk livslängd | > 500 Mating cycles |
Övre gränstemperatur | 85 °C |
Lägre gränstemperatur | -25 °C |
Märkström (40°C) | 2 A |
Märkspänning | 60 V |
Märksstötsspänning | 800 V |
Föroreningsgrad | 2 |
Överspänningskategori | II |
Isolermaterialgrupp | II |
Resistans | ≤ 3 mΩ |
Insulation resistance | ≥ 10¹⁰Ω |
Kontaktmaterial | CuZn (brass) |
Kontaktplätering | Au (gold) |
Kontaktkroppsmaterial | PA (UL 94 V-0) |
Kontakthusmaterial | PA |
Godkännande 1 | VDE |
Customs tariff number | 85369010 |
Weight (g) | 10.644 |





Security notices
- The connectors are designed for use in plant, control system and electrical equipment. The end user is responsible for checking whether the connectors are suitable for use in other applications.
- Connectors with degree of protection IP 67 and IP 68 are not suitable for use under water. When used outdoors, the connectors must be separately protected against corrosion. For further information about IP degrees of protection refer to ‘Technical support’ in the Download Centre.
Nedladdningar
Produktblad
Certificates
CAD-filer
Contact to customer service
Do you have any questions regarding our products or do you wish an individual offer?